Classification: Fixed tube sheet heat exchanger with removable bonnets and water injection. Features: The client will be stripping nitrogen from a gas stream. This gas stream must be heated and cooled during the process.
Classification: ACHE, with 2 fans per bay, plug type header, high-finned tube, louvers, electric heating, platform. Features: Air cooler for a THIOPAQ unit in Rotterdam. The plug-type header allows for easy cleaning of the tubes. To protect the bundle and the process gas from freezing, an electric heater is placed under the bundle and a […]
Classification: Gas heater, single-pass element with a construction that is not affected by thermal stresses. Features: The heat exchanger is used in a process where biomass is converted into green fuels. In this application, a gas stream must be heated to 300 degrees. The gas is heated by flue gas from the same system. Due […]
Classification: Hydrogen cooler, shell & tube with a U-bundle in a fully welded construction. Features: The heat exchanger had to be designed for 100 barg on both sides. Additionally, the customer required the shell-side volume to be at least ±35 L to accommodate pressure fluctuations. There was also a restriction on the available length. Robox […]
Classification: Gas cooler, multi-bundle air cooler, plug-type headers made of super duplex. Features: Air cooler, intercooler for a high-pressure compressor. The installation is for an unmanned offshore platform. Due to weather conditions, the client opted for super duplex as the material for the process side.
Classification: Gas cooler, Shell & Tube removable U-bundle, Replacement bundle. Features: The removable U-bundle was in need of replacement. The original manufacturer no longer produces heat exchangers, so ROBOX was requested to manufacture a new bundle based on the drawings.
